911 Engine Removal

Engine removal time lapse.

Engine removal high level steps:

1. Disconnect Battery First
2. Remove Fuel Pump Relay Under Driver Seat
3. Empty Oil from Engine Sump
4. Empty Oil from Oil Tank
5. Raise Car on Jack Stands
6. Disconnect Hard Oil Line
7. Disconnect & Remove Rubber Oil Line
8. Disconnect Clutch Cable, Arm, and Helper Spring Assembly
9. Disconnect Starter Solenoid Electrical Connections
10. Disconnect Reverse Backup Switch from Transmission
11. Disconnect Heater Hoses From Heat Exchangers
12. Disconnect and Remove Shift Coupler
13. Disconnect A/C Compressor and Tie to Side of Car
14. Disconnect all Fuel Lines
15. Disconnect Main Engine Wire Harness
16. Disconnect Breather Hoses
17. Disconnect Accelerator Linkage Bar
18. Disconnect Cruise Control Cable
19. Disconnect Oxygen Sensor
20. Remove Four Nuts that Hold Engine to Tranny
21. Remove Engine Motor Mount Bolts
22. Lower Engine Down
23. Pull Engine Away from Transmission
24. Lower Down onto Cart and Remove

Another video shows engine removal time lapse.

911T engine removal video with some details.